And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:39.311
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.585
And
I accept adding "cowsay" to Additional Software
5.494
And
Additional Software is correctly configured for package "cowsay"
0.851
And
I shutdown Tails and wait for the computer to power off
8.076
And
I start Tails from USB drive "__internal" with network unplugged
43.327
And
I enable persistence
7.481
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
12.670
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.427
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.087
And
available upgrades have been checked
1.123
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.663
And
I can open the Additional Software configuration window from the notification
2.889
And
I shutdown Tails and wait for the computer to power off
17.388
And
I start Tails from USB drive "__internal" with network unplugged
44.157
And
I enable persistence
8.747
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.405
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.709
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.067
Then
the Additional Software upgrade service has started
0.140
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073