And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.361
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.825
And
I accept adding "cowsay" to Additional Software
4.965
And
Additional Software is correctly configured for package "cowsay"
0.696
And
I shutdown Tails and wait for the computer to power off
8.078
And
I start Tails from USB drive "__internal" with network unplugged
36.840
And
I enable persistence
5.629
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.006
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.019
And
available upgrades have been checked
2.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.509
And
I can open the Additional Software configuration window from the notification
2.537
And
I shutdown Tails and wait for the computer to power off
17.671
And
I start Tails from USB drive "__internal" with network unplugged
37.080
And
I enable persistence
5.558
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.709
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.157
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059