And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:32.916
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.958
And
I accept adding "cowsay" to Additional Software
5.536
And
Additional Software is correctly configured for package "cowsay"
0.810
And
I shutdown Tails and wait for the computer to power off
7.481
And
I start Tails from USB drive "__internal" with network unplugged
43.793
And
I enable persistence
9.308
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.838
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.468
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.052
And
available upgrades have been checked
0.076
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.068
And
I can open the Additional Software configuration window from the notification
2.671
And
I shutdown Tails and wait for the computer to power off
18.509
And
I start Tails from USB drive "__internal" with network unplugged
45.197
And
I enable persistence
8.075
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.396
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075