And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.300
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.347
And
I accept adding "cowsay" to Additional Software
3.715
And
Additional Software is correctly configured for package "cowsay"
0.563
And
I shutdown Tails and wait for the computer to power off
7.928
And
I start Tails from USB drive "__internal" with network unplugged
35.585
And
I enable persistence
5.808
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.232
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.346
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.022
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.615
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
17.002
And
I start Tails from USB drive "__internal" with network unplugged
34.994
And
I enable persistence
5.703
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
8.757
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.310
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.144
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069