And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.738
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.442
And
I accept adding "cowsay" to Additional Software
3.698
And
Additional Software is correctly configured for package "cowsay"
0.921
And
I shutdown Tails and wait for the computer to power off
8.313
And
I start Tails from USB drive "__internal" with network unplugged
37.800
And
I enable persistence
6.399
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.707
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.015
And
available upgrades have been checked
2.225
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.974
And
I can open the Additional Software configuration window from the notification
2.577
And
I shutdown Tails and wait for the computer to power off
18.967
And
I start Tails from USB drive "__internal" with network unplugged
37.855
And
I enable persistence
5.551
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.720
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.358
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061