And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.623
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.609
And
I accept adding "cowsay" to Additional Software
3.633
And
Additional Software is correctly configured for package "cowsay"
0.622
And
I shutdown Tails and wait for the computer to power off
8.250
And
I start Tails from USB drive "__internal" with network unplugged
37.679
And
I enable persistence
7.085
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.312
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.660
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.015
And
available upgrades have been checked
2.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.565
And
I can open the Additional Software configuration window from the notification
2.623
And
I shutdown Tails and wait for the computer to power off
22.743
And
I start Tails from USB drive "__internal" with network unplugged
37.390
And
I enable persistence
6.495
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.138
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.348
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.198
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.112