And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.380
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.978
And
I accept adding "cowsay" to Additional Software
4.951
And
Additional Software is correctly configured for package "cowsay"
0.798
And
I shutdown Tails and wait for the computer to power off
8.931
And
I start Tails from USB drive "__internal" with network unplugged
40.076
And
I enable persistence
6.893
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
12.457
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.430
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.017
And
available upgrades have been checked
2.186
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.014
And
I can open the Additional Software configuration window from the notification
2.586
And
I shutdown Tails and wait for the computer to power off
22.615
And
I start Tails from USB drive "__internal" with network unplugged
40.048
And
I enable persistence
8.462
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.347
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.348
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.124
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061