And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.978
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.851
And
I accept adding "cowsay" to Additional Software
5.063
And
Additional Software is correctly configured for package "cowsay"
0.778
And
I shutdown Tails and wait for the computer to power off
4.198
And
I start Tails from USB drive "__internal" with network unplugged
37.789
And
I enable persistence
6.815
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.344
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.740
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.018
And
available upgrades have been checked
1.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.995
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
22.581
And
I start Tails from USB drive "__internal" with network unplugged
36.596
And
I enable persistence
5.591
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.140
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.352
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.154
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065