And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.056
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.592
And
I accept adding "cowsay" to Additional Software
3.713
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
8.182
And
I start Tails from USB drive "__internal" with network unplugged
36.759
And
I enable persistence
6.308
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
11.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.278
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.016
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.995
And
I can open the Additional Software configuration window from the notification
2.494
And
I shutdown Tails and wait for the computer to power off
17.504
And
I start Tails from USB drive "__internal" with network unplugged
36.993
And
I enable persistence
5.741
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.622
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.351
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060