And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.739
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.208
And
I accept adding "cowsay" to Additional Software
5.014
And
Additional Software is correctly configured for package "cowsay"
0.605
And
I shutdown Tails and wait for the computer to power off
7.916
And
I start Tails from USB drive "__internal" with network unplugged
37.326
And
I enable persistence
6.978
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.096
And
I log in to a new session
9.973
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.355
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.071
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.020
And
available upgrades have been checked
3.235
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.409
And
I can open the Additional Software configuration window from the notification
2.579
And
I shutdown Tails and wait for the computer to power off
17.648
And
I start Tails from USB drive "__internal" with network unplugged
36.900
And
I enable persistence
7.223
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.162
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.383
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062