And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.272
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.966
And
I accept adding "cowsay" to Additional Software
4.963
And
Additional Software is correctly configured for package "cowsay"
0.654
And
I shutdown Tails and wait for the computer to power off
8.287
And
I start Tails from USB drive "__internal" with network unplugged
36.735
And
I enable persistence
6.761
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.076
And
I log in to a new session
9.282
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.525
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.013
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.080
And
I can open the Additional Software configuration window from the notification
2.571
And
I shutdown Tails and wait for the computer to power off
17.824
And
I start Tails from USB drive "__internal" with network unplugged
36.596
And
I enable persistence
6.924
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.263
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061