And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.723
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.622
And
I accept adding "cowsay" to Additional Software
4.776
And
Additional Software is correctly configured for package "cowsay"
0.590
And
I shutdown Tails and wait for the computer to power off
8.011
And
I start Tails from USB drive "__internal" with network unplugged
37.704
And
I enable persistence
6.832
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.805
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.015
And
available upgrades have been checked
3.257
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.459
And
I can open the Additional Software configuration window from the notification
2.764
And
I shutdown Tails and wait for the computer to power off
17.272
And
I start Tails from USB drive "__internal" with network unplugged
37.209
And
I enable persistence
6.271
And
I configure APT to prefer an old version of cowsay
0.034
And
I log in to a new session
10.379
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.264
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064