And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.374
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.913
And
I accept adding "cowsay" to Additional Software
5.023
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
4.275
And
I start Tails from USB drive "__internal" with network unplugged
37.430
And
I enable persistence
5.504
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.311
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.014
And
available upgrades have been checked
2.187
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.998
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
17.442
And
I start Tails from USB drive "__internal" with network unplugged
37.560
And
I enable persistence
5.216
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
11.652
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.279
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.230
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.087