And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.648
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.511
And
I accept adding "cowsay" to Additional Software
3.730
And
Additional Software is correctly configured for package "cowsay"
0.733
And
I shutdown Tails and wait for the computer to power off
8.148
And
I start Tails from USB drive "__internal" with network unplugged
36.959
And
I enable persistence
6.578
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.345
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.455
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.019
And
available upgrades have been checked
2.199
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.514
And
I can open the Additional Software configuration window from the notification
2.519
And
I shutdown Tails and wait for the computer to power off
17.288
And
I start Tails from USB drive "__internal" with network unplugged
36.862
And
I enable persistence
6.647
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.824
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.354
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.140
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082