And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.283
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.537
And
I accept adding "cowsay" to Additional Software
4.887
And
Additional Software is correctly configured for package "cowsay"
0.826
And
I shutdown Tails and wait for the computer to power off
4.234
And
I start Tails from USB drive "__internal" with network unplugged
40.262
And
I enable persistence
5.978
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.971
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.410
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.077
And
the network is plugged
0.019
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.403
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
18.372
And
I start Tails from USB drive "__internal" with network unplugged
39.308
And
I enable persistence
6.870
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
12.258
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.453
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.149
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065