And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.300
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.543
And
I accept adding "cowsay" to Additional Software
3.645
And
Additional Software is correctly configured for package "cowsay"
0.583
And
I shutdown Tails and wait for the computer to power off
8.024
And
I start Tails from USB drive "__internal" with network unplugged
35.843
And
I enable persistence
5.920
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
8.953
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.345
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.015
And
available upgrades have been checked
0.042
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.580
And
I can open the Additional Software configuration window from the notification
2.553
And
I shutdown Tails and wait for the computer to power off
22.479
And
I start Tails from USB drive "__internal" with network unplugged
36.289
And
I enable persistence
5.613
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.178
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.295
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.130
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057