And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.371
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.455
And
I accept adding "cowsay" to Additional Software
5.565
And
Additional Software is correctly configured for package "cowsay"
0.716
And
I shutdown Tails and wait for the computer to power off
7.577
And
I start Tails from USB drive "__internal" with network unplugged
41.838
And
I enable persistence
7.537
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
10.895
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.409
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.067
And
available upgrades have been checked
0.062
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.179
And
I can open the Additional Software configuration window from the notification
2.850
And
I shutdown Tails and wait for the computer to power off
22.134
And
I start Tails from USB drive "__internal" with network unplugged
41.433
And
I enable persistence
7.465
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
10.767
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.059
Then
the Additional Software upgrade service has started
0.156
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069