And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.545
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.305
And
I accept adding "cowsay" to Additional Software
5.052
And
Additional Software is correctly configured for package "cowsay"
0.578
And
I shutdown Tails and wait for the computer to power off
4.040
And
I start Tails from USB drive "__internal" with network unplugged
37.327
And
I enable persistence
6.578
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.642
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.722
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.014
And
available upgrades have been checked
1.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.997
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
17.489
And
I start Tails from USB drive "__internal" with network unplugged
37.482
And
I enable persistence
6.731
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.412
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.272
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.261
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.137