And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.482
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.723
And
I accept adding "cowsay" to Additional Software
3.651
And
Additional Software is correctly configured for package "cowsay"
0.592
And
I shutdown Tails and wait for the computer to power off
7.866
And
I start Tails from USB drive "__internal" with network unplugged
36.024
And
I enable persistence
5.727
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.077
And
I log in to a new session
9.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.656
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.014
And
available upgrades have been checked
2.146
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.479
And
I can open the Additional Software configuration window from the notification
2.516
And
I shutdown Tails and wait for the computer to power off
22.285
And
I start Tails from USB drive "__internal" with network unplugged
36.197
And
I enable persistence
5.803
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
8.829
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.324
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.151
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072