And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.406
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.368
And
I accept adding "cowsay" to Additional Software
5.651
And
Additional Software is correctly configured for package "cowsay"
0.721
And
I shutdown Tails and wait for the computer to power off
7.546
And
I start Tails from USB drive "__internal" with network unplugged
41.274
And
I enable persistence
7.836
And
I configure APT to prefer an old version of cowsay
0.041
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
11.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.326
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.082
And
available upgrades have been checked
0.057
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.062
And
I can open the Additional Software configuration window from the notification
2.760
And
I shutdown Tails and wait for the computer to power off
13.531
And
I start Tails from USB drive "__internal" with network unplugged
41.526
And
I enable persistence
7.880
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
11.596
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.331
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.085