And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:33.364
And
I configure APT to prefer an old version of cowsay
0.071
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.587
And
I accept adding "cowsay" to Additional Software
5.748
And
Additional Software is correctly configured for package "cowsay"
1.271
And
I shutdown Tails and wait for the computer to power off
7.872
And
I start Tails from USB drive "__internal" with network unplugged
44.469
And
I enable persistence
8.704
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.074
And
I log in to a new session
11.868
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.746
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.064
And
I prepare the Additional Software upgrade process to fail
0.070
And
the network is plugged
0.059
And
available upgrades have been checked
1.283
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.577
And
I can open the Additional Software configuration window from the notification
3.010
And
I shutdown Tails and wait for the computer to power off
2:7.337
And
I start Tails from USB drive "__internal" with network unplugged
44.237
And
I enable persistence
9.348
And
I configure APT to prefer an old version of cowsay
0.049
And
I log in to a new session
13.942
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.801
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.073
Then
the Additional Software upgrade service has started
0.190
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074