And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.955
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.960
And
I accept adding "cowsay" to Additional Software
5.200
And
Additional Software is correctly configured for package "cowsay"
0.713
And
I shutdown Tails and wait for the computer to power off
8.036
And
I start Tails from USB drive "__internal" with network unplugged
37.666
And
I enable persistence
6.741
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.440
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.386
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.016
And
available upgrades have been checked
1.102
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.178
And
I can open the Additional Software configuration window from the notification
2.538
And
I shutdown Tails and wait for the computer to power off
22.910
And
I start Tails from USB drive "__internal" with network unplugged
36.846
And
I enable persistence
7.082
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.847
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.356
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.130
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068