And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.906
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.897
And
I accept adding "cowsay" to Additional Software
4.055
And
Additional Software is correctly configured for package "cowsay"
0.745
And
I shutdown Tails and wait for the computer to power off
7.634
And
I start Tails from USB drive "__internal" with network unplugged
41.355
And
I enable persistence
7.530
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
11.422
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.356
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.086
And
the network is plugged
0.061
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.286
And
I can open the Additional Software configuration window from the notification
2.660
And
I shutdown Tails and wait for the computer to power off
17.914
And
I start Tails from USB drive "__internal" with network unplugged
41.759
And
I enable persistence
7.851
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
11.219
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.376
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.047
Then
the Additional Software upgrade service has started
0.206
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.080