And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.027
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.545
And
I accept adding "cowsay" to Additional Software
5.104
And
Additional Software is correctly configured for package "cowsay"
0.650
And
I shutdown Tails and wait for the computer to power off
4.025
And
I start Tails from USB drive "__internal" with network unplugged
37.087
And
I enable persistence
6.490
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.896
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.385
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.103
And
the network is plugged
0.031
And
available upgrades have been checked
0.039
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.090
And
I can open the Additional Software configuration window from the notification
2.583
And
I shutdown Tails and wait for the computer to power off
17.536
And
I start Tails from USB drive "__internal" with network unplugged
37.424
And
I enable persistence
7.279
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.488
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.413
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.139
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082