And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.513
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.452
And
I accept adding "cowsay" to Additional Software
3.735
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
7.816
And
I start Tails from USB drive "__internal" with network unplugged
34.623
And
I enable persistence
6.450
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
8.553
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.394
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.013
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.155
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
7.822
And
I start Tails from USB drive "__internal" with network unplugged
35.801
And
I enable persistence
5.372
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.482
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.276
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.127
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059