And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.557
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.942
And
I accept adding "cowsay" to Additional Software
5.475
And
Additional Software is correctly configured for package "cowsay"
0.716
And
I shutdown Tails and wait for the computer to power off
3.079
And
I start Tails from USB drive "__internal" with network unplugged
42.043
And
I enable persistence
7.632
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
12.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.324
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.052
And
available upgrades have been checked
0.075
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.083
And
I can open the Additional Software configuration window from the notification
2.856
And
I shutdown Tails and wait for the computer to power off
18.085
And
I start Tails from USB drive "__internal" with network unplugged
42.070
And
I enable persistence
7.927
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
10.728
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.901
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.061
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071