And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.009
And
I configure APT to prefer an old version of cowsay
0.017
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.904
And
I accept adding "cowsay" to Additional Software
3.658
And
Additional Software is correctly configured for package "cowsay"
0.797
And
I shutdown Tails and wait for the computer to power off
8.495
And
I start Tails from USB drive "__internal" with network unplugged
36.933
And
I enable persistence
6.359
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.065
And
I log in to a new session
9.958
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.381
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.019
And
available upgrades have been checked
1.111
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.491
And
I can open the Additional Software configuration window from the notification
2.566
And
I shutdown Tails and wait for the computer to power off
17.523
And
I start Tails from USB drive "__internal" with network unplugged
36.863
And
I enable persistence
6.594
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.212
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.314
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.119
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056