And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.886
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.660
And
I accept adding "cowsay" to Additional Software
3.638
And
Additional Software is correctly configured for package "cowsay"
0.671
And
I shutdown Tails and wait for the computer to power off
4.379
And
I start Tails from USB drive "__internal" with network unplugged
37.197
And
I enable persistence
7.038
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.964
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.412
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.016
And
available upgrades have been checked
1.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.679
And
I can open the Additional Software configuration window from the notification
2.580
And
I shutdown Tails and wait for the computer to power off
22.956
And
I start Tails from USB drive "__internal" with network unplugged
36.536
And
I enable persistence
6.460
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.437
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.275
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056