And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.888
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.509
And
I accept adding "cowsay" to Additional Software
5.152
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
4.035
And
I start Tails from USB drive "__internal" with network unplugged
35.976
And
I enable persistence
5.475
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.400
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.304
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.014
And
available upgrades have been checked
2.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.989
And
I can open the Additional Software configuration window from the notification
2.543
And
I shutdown Tails and wait for the computer to power off
22.709
And
I start Tails from USB drive "__internal" with network unplugged
36.983
And
I enable persistence
5.459
And
I configure APT to prefer an old version of cowsay
0.037
And
I log in to a new session
11.259
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.350
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.152
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052