And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.678
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.821
And
I accept adding "cowsay" to Additional Software
5.561
And
Additional Software is correctly configured for package "cowsay"
0.747
And
I shutdown Tails and wait for the computer to power off
7.506
And
I start Tails from USB drive "__internal" with network unplugged
41.684
And
I enable persistence
7.932
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
12.067
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.396
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.055
And
available upgrades have been checked
0.065
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.989
And
I can open the Additional Software configuration window from the notification
3.108
And
I shutdown Tails and wait for the computer to power off
18.413
And
I start Tails from USB drive "__internal" with network unplugged
44.509
And
I enable persistence
9.633
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
12.289
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.185
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067