And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.384
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.926
And
I accept adding "cowsay" to Additional Software
5.067
And
Additional Software is correctly configured for package "cowsay"
0.635
And
I shutdown Tails and wait for the computer to power off
3.996
And
I start Tails from USB drive "__internal" with network unplugged
36.020
And
I enable persistence
6.344
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.178
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.337
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.527
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
13.696
And
I start Tails from USB drive "__internal" with network unplugged
36.179
And
I enable persistence
5.726
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.898
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.064