And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.895
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.952
And
I accept adding "cowsay" to Additional Software
5.047
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
8.212
And
I start Tails from USB drive "__internal" with network unplugged
39.649
And
I enable persistence
8.063
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.075
And
I log in to a new session
10.678
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.543
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.026
And
available upgrades have been checked
1.292
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.276
And
I can open the Additional Software configuration window from the notification
2.670
And
I shutdown Tails and wait for the computer to power off
8.262
And
I start Tails from USB drive "__internal" with network unplugged
38.286
And
I enable persistence
5.860
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.616
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.188
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063