And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.899
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.206
And
I accept adding "cowsay" to Additional Software
3.797
And
Additional Software is correctly configured for package "cowsay"
0.814
And
I shutdown Tails and wait for the computer to power off
8.405
And
I start Tails from USB drive "__internal" with network unplugged
36.586
And
I enable persistence
6.197
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.766
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.414
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
3.282
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.551
And
I can open the Additional Software configuration window from the notification
2.561
And
I shutdown Tails and wait for the computer to power off
13.998
And
I start Tails from USB drive "__internal" with network unplugged
36.272
And
I enable persistence
6.697
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.577
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.817
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.111
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.135
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062