And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.052
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.568
And
I accept adding "cowsay" to Additional Software
5.564
And
Additional Software is correctly configured for package "cowsay"
0.822
And
I shutdown Tails and wait for the computer to power off
7.691
And
I start Tails from USB drive "__internal" with network unplugged
43.432
And
I enable persistence
8.104
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
10.596
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.432
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.068
And
available upgrades have been checked
1.101
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.363
And
I can open the Additional Software configuration window from the notification
2.676
And
I shutdown Tails and wait for the computer to power off
22.479
And
I start Tails from USB drive "__internal" with network unplugged
42.002
And
I enable persistence
7.796
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
12.743
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.307
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.068
Then
the Additional Software upgrade service has started
0.143
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.076