And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.986
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.794
And
I accept adding "cowsay" to Additional Software
5.206
And
Additional Software is correctly configured for package "cowsay"
0.752
And
I shutdown Tails and wait for the computer to power off
4.092
And
I start Tails from USB drive "__internal" with network unplugged
38.665
And
I enable persistence
6.780
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.167
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.355
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.020
And
available upgrades have been checked
2.175
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.035
And
I can open the Additional Software configuration window from the notification
2.975
And
I shutdown Tails and wait for the computer to power off
18.474
And
I start Tails from USB drive "__internal" with network unplugged
39.551
And
I enable persistence
8.205
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
12.222
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.166
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065