And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.196
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.867
And
I accept adding "cowsay" to Additional Software
4.986
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
8.508
And
I start Tails from USB drive "__internal" with network unplugged
37.207
And
I enable persistence
6.696
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.049
And
I log in to a new session
9.663
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.714
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.015
And
available upgrades have been checked
0.061
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.857
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
17.532
And
I start Tails from USB drive "__internal" with network unplugged
37.442
And
I enable persistence
6.746
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.784
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.142
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077