And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.480
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.369
And
I accept adding "cowsay" to Additional Software
3.597
And
Additional Software is correctly configured for package "cowsay"
0.552
And
I shutdown Tails and wait for the computer to power off
7.853
And
I start Tails from USB drive "__internal" with network unplugged
34.488
And
I enable persistence
5.554
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.538
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.307
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.014
And
available upgrades have been checked
1.077
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.526
And
I can open the Additional Software configuration window from the notification
2.530
And
I shutdown Tails and wait for the computer to power off
18.674
And
I start Tails from USB drive "__internal" with network unplugged
34.871
And
I enable persistence
5.365
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.931
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.282
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061