And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.221
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.716
And
I accept adding "cowsay" to Additional Software
3.726
And
Additional Software is correctly configured for package "cowsay"
0.543
And
I shutdown Tails and wait for the computer to power off
7.846
And
I start Tails from USB drive "__internal" with network unplugged
35.790
And
I enable persistence
5.355
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.151
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.428
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.078
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.020
And
available upgrades have been checked
0.031
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.094
And
I can open the Additional Software configuration window from the notification
2.504
And
I shutdown Tails and wait for the computer to power off
22.245
And
I start Tails from USB drive "__internal" with network unplugged
35.834
And
I enable persistence
5.506
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.036
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.125
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060