And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.095
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.394
And
I accept adding "cowsay" to Additional Software
3.952
And
Additional Software is correctly configured for package "cowsay"
0.652
And
I shutdown Tails and wait for the computer to power off
7.386
And
I start Tails from USB drive "__internal" with network unplugged
39.886
And
I enable persistence
7.249
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.529
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.426
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.063
And
available upgrades have been checked
0.046
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.893
And
I can open the Additional Software configuration window from the notification
2.740
And
I shutdown Tails and wait for the computer to power off
13.515
And
I start Tails from USB drive "__internal" with network unplugged
40.602
And
I enable persistence
7.343
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
11.923
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.370
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.051
Then
the Additional Software upgrade service has started
0.162
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067