And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
2:3.161
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.172
And
I accept adding "cowsay" to Additional Software
5.812
And
Additional Software is correctly configured for package "cowsay"
0.786
And
I shutdown Tails and wait for the computer to power off
8.136
And
I start Tails from USB drive "__internal" with network unplugged
44.147
And
I enable persistence
9.380
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.067
And
I log in to a new session
12.875
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
11.065
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.075
And
available upgrades have been checked
0.081
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.010
And
I can open the Additional Software configuration window from the notification
2.883
And
I shutdown Tails and wait for the computer to power off
2:8.261
And
I start Tails from USB drive "__internal" with network unplugged
43.053
And
I enable persistence
9.302
And
I configure APT to prefer an old version of cowsay
0.024
And
I log in to a new session
13.216
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.324
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.169
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077