And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.869
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.227
And
I accept adding "cowsay" to Additional Software
3.720
And
Additional Software is correctly configured for package "cowsay"
0.640
And
I shutdown Tails and wait for the computer to power off
7.825
And
I start Tails from USB drive "__internal" with network unplugged
34.853
And
I enable persistence
5.204
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
9.890
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.014
And
available upgrades have been checked
0.043
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.503
And
I can open the Additional Software configuration window from the notification
2.526
And
I shutdown Tails and wait for the computer to power off
7.975
And
I start Tails from USB drive "__internal" with network unplugged
34.485
And
I enable persistence
5.412
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.950
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.249
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.127
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048