And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:36.203
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.221
And
I accept adding "cowsay" to Additional Software
5.656
And
Additional Software is correctly configured for package "cowsay"
0.856
And
I shutdown Tails and wait for the computer to power off
7.592
And
I start Tails from USB drive "__internal" with network unplugged
41.898
And
I enable persistence
9.022
And
I configure APT to prefer an old version of cowsay
0.024
And
I disable the tails-virt-notify-user.service user unit
0.069
And
I log in to a new session
13.102
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.050
And
available upgrades have been checked
0.066
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.552
And
I can open the Additional Software configuration window from the notification
2.920
And
I shutdown Tails and wait for the computer to power off
18.230
And
I start Tails from USB drive "__internal" with network unplugged
42.653
And
I enable persistence
7.830
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
13.657
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.445
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.179
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065