And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.026
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.520
And
I accept adding "cowsay" to Additional Software
3.648
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
8.241
And
I start Tails from USB drive "__internal" with network unplugged
34.427
And
I enable persistence
5.585
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.512
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.357
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.013
And
available upgrades have been checked
3.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.482
And
I can open the Additional Software configuration window from the notification
2.500
And
I shutdown Tails and wait for the computer to power off
18.648
And
I start Tails from USB drive "__internal" with network unplugged
35.640
And
I enable persistence
5.294
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
8.756
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.277
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.144
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056