And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.688
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.106
And
I accept adding "cowsay" to Additional Software
5.623
And
Additional Software is correctly configured for package "cowsay"
0.701
And
I shutdown Tails and wait for the computer to power off
7.884
And
I start Tails from USB drive "__internal" with network unplugged
41.878
And
I enable persistence
7.943
And
I configure APT to prefer an old version of cowsay
0.021
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
11.563
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.064
And
available upgrades have been checked
0.070
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.245
And
I can open the Additional Software configuration window from the notification
2.895
And
I shutdown Tails and wait for the computer to power off
18.350
And
I start Tails from USB drive "__internal" with network unplugged
41.801
And
I enable persistence
9.001
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
13.240
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.339
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.062
Then
the Additional Software upgrade service has started
0.202
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.092