And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.900
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.335
And
I accept adding "cowsay" to Additional Software
3.713
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
7.967
And
I start Tails from USB drive "__internal" with network unplugged
34.608
And
I enable persistence
5.409
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.243
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.330
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.016
And
available upgrades have been checked
2.156
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.531
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
22.296
And
I start Tails from USB drive "__internal" with network unplugged
35.406
And
I enable persistence
5.411
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.699
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.122
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057