And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.526
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.309
And
I accept adding "cowsay" to Additional Software
3.620
And
Additional Software is correctly configured for package "cowsay"
0.609
And
I shutdown Tails and wait for the computer to power off
7.927
And
I start Tails from USB drive "__internal" with network unplugged
35.319
And
I enable persistence
6.358
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.637
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.365
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.014
And
available upgrades have been checked
3.210
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.500
And
I can open the Additional Software configuration window from the notification
2.507
And
I shutdown Tails and wait for the computer to power off
13.056
And
I start Tails from USB drive "__internal" with network unplugged
34.312
And
I enable persistence
5.358
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.989
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.258
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.149
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055