And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.617
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.152
And
I accept adding "cowsay" to Additional Software
3.684
And
Additional Software is correctly configured for package "cowsay"
0.545
And
I shutdown Tails and wait for the computer to power off
7.842
And
I start Tails from USB drive "__internal" with network unplugged
34.168
And
I enable persistence
5.212
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.746
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.662
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.020
And
available upgrades have been checked
2.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.466
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
13.041
And
I start Tails from USB drive "__internal" with network unplugged
34.387
And
I enable persistence
5.440
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.662
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.347
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.113
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057