And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:42.134
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.134
And
I accept adding "cowsay" to Additional Software
3.574
And
Additional Software is correctly configured for package "cowsay"
0.567
And
I shutdown Tails and wait for the computer to power off
8.350
And
I start Tails from USB drive "__internal" with network unplugged
34.642
And
I enable persistence
5.374
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
8.717
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.366
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.015
And
available upgrades have been checked
2.144
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.483
And
I can open the Additional Software configuration window from the notification
2.555
And
I shutdown Tails and wait for the computer to power off
13.068
And
I start Tails from USB drive "__internal" with network unplugged
34.060
And
I enable persistence
5.345
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.517
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.273
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.105
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054