And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.910
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.576
And
I accept adding "cowsay" to Additional Software
3.643
And
Additional Software is correctly configured for package "cowsay"
0.604
And
I shutdown Tails and wait for the computer to power off
7.833
And
I start Tails from USB drive "__internal" with network unplugged
34.659
And
I enable persistence
6.324
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.836
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.281
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.013
And
available upgrades have been checked
2.155
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.486
And
I can open the Additional Software configuration window from the notification
2.540
And
I shutdown Tails and wait for the computer to power off
7.990
And
I start Tails from USB drive "__internal" with network unplugged
34.519
And
I enable persistence
6.437
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.452
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.464
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.151
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057