And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.418
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.526
And
I accept adding "cowsay" to Additional Software
5.654
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
7.856
And
I start Tails from USB drive "__internal" with network unplugged
39.440
And
I enable persistence
7.507
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
12.344
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.717
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.075
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.074
And
available upgrades have been checked
0.080
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.719
And
I can open the Additional Software configuration window from the notification
3.031
And
I shutdown Tails and wait for the computer to power off
2:2.846
And
I start Tails from USB drive "__internal" with network unplugged
40.142
And
I enable persistence
7.428
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
12.146
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.306
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.064
Then
the Additional Software upgrade service has started
0.134
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.088